#Whitesmoke rgb full#

If your machine stops working normally, please unplug the power plug, drain the smoke from the water tank, and ask a qualified electrician or service center to repair the machine. Before descaling or maintenance, be sure to cool the machine to room temperature. Running the machine without liquid can cause it to overheat and damage the pump.

#Whitesmoke rgb full#

Before using the machine, please make sure that the fuel tank is full or there is enough atomized liquid. Do not mix these liquids into mist liquids. Never put any type of flammable liquid into the atomizing liquid tank. Keep flammable objects at least 3 feet away from the atomizing nozzle. During the use of this machine, the nozzle becomes very hot (up to 600в„‰). Do not cover any ventilation holes on the machine, and leave at least one foot of space around the machine when the machine is working to ensure that air flows in and out of the machine freely. Place the sprayer in a well-ventilated place. Never point the machine directly at people or animals For indoor use only, not for outdoor use If you do not use the fog machine, please keep the fog machine dry and unplug the power plug. When the temperature drops, it takes time to warm up againДҐ. If the fog machine stops running, please reheat it. Press 'FOG': RGB colors will glow together, and gradually produce lighting effects with the fog.Д¤. Before use, plug the fog machine into the power cord and warm up for about 3-5 minutes Remove all packaging, open the water tank cover, and pour in a suitable high-quality atomizing liquid (not included in the package) Дў. After connecting the signal receiver, it can be controlled by a wireless remote control within 10 meters.ДЎ. Remote control: The length of the signal receiver is 35cm.